Pasadena Pools

Stainless steel pools in Park City and Utah.

A stainless steel pool is built in a fabrication shop, shipped to the site and set by crane. In the mountains that solves three problems concrete can't: weight, weather and time.

Where stainless makes sense

  • On a deck, a terrace or a roof. A stainless vessel and its frame weigh roughly a quarter to a third of the same pool in concrete, so the structure under it can be lighter.
  • Where winter stops concrete. There's no shotcrete to cure and no plaster to protect, so the vessel can be set in cold weather.
  • Where freeze-thaw is hard on finishes. A welded shell has no plaster or grout to crack.
  • Where an edge has to be dead level. Vanishing edges and perimeter overflow are built to shop tolerances.

What it costs you

  • It costs more up front than a concrete pool of the same size.
  • The shape is fixed once fabrication starts. Changes after shop drawings are expensive.
  • Fabrication has a lead time, so the vessel gets ordered early in the build.
  • It needs crane access on set day.

How we put one in

  1. We work out size, depth, edges and location with your architect and structural engineer.
  2. The fabricator produces shop drawings. We coordinate the structure, penetrations and equipment against them.
  3. We build the pad or vault and rough in plumbing and power.
  4. Crane day. The vessel arrives finished and gets set in hours.
  5. We connect it, install the equipment and cover, and start it up.

Questions we get

Can a stainless steel pool go on a roof or an upper deck?

Yes. That's where stainless is used most, because the vessel weighs far less than concrete. The building still has to be engineered for the water load.

Can you install a stainless pool in winter?

The vessel itself can be set in cold weather, because nothing has to cure. Footings and site work still depend on conditions.

Does it have to look like bare metal?

No. A stainless pool can be left as finished steel or built tile-ready and tiled like any other pool.

Do you build commercial stainless pools?

Yes, for hotels, clubs and multifamily projects. Public pools in Utah go through health department plan review under R392-302.

Is stainless better than concrete?

It depends on the site. On grade with good access, concrete usually costs less and can take any shape. On structure, at altitude or on a tight winter schedule, stainless often wins.

Related

Start a stainless project

Send plans if you have them. If not, tell us where it's going: on grade, in a deck or on a roof.

(801) 901-0580 scott@pasadenapools.com Salt Lake City, Utah

This opens your email app with the details filled in.