Pasadena Pools

Stainless steel cold plunges for homes, gyms and wellness centers.

A stainless cold plunge is a welded steel vessel with a chiller, filtration and sanitation behind it. We install them indoors and out, for homes, gyms and wellness centers in Utah and Idaho.

We've worked on custom metal cold plunges for a home in North Idaho and for wellness centers in Utah.

What goes into a plunge

  • The vessel. Built to your dimensions, with steps, a bench and a handrail where you want them.
  • The chiller. Sized for the water volume and how many people use it in an hour. Most plunges are kept around 50 to 55 degrees.
  • Filtration and sanitation, sized for the bather load.
  • A cover, to hold temperature and keep debris out.
  • An equipment space with power, drainage and ventilation for the chiller.

Homes

  • A plunge next to a hot tub or sauna gives you a hot and cold circuit in a few steps.
  • Indoors, plan for floor load, a floor drain and humidity. Outdoors, plan for freeze protection on the lines.
  • Controls can be watched from your phone, which matters in a second home.

Gyms, clubs and wellness centers

  • A plunge open to members or guests is a public pool. In Utah it goes through health department plan review and inspection.
  • Accessibility has to be designed in: entry, handrails and clearances.
  • Heavy use needs more chiller and more filtration than a home plunge. We size it for the busiest hour.

Questions we get

Why stainless steel for a cold plunge?

It's welded, so there are no tile joints or plaster to maintain in cold water. It's light enough to set on a framed floor or a roof deck, and it cleans easily.

How cold does a cold plunge get?

Most are run between 50 and 55 degrees. The chiller is sized for the temperature you want and how hard the plunge gets used.

Can a cold plunge go indoors?

Yes. The room needs a floor that can carry the water, a drain, ventilation, and a place for the chiller to reject heat.

Do commercial cold plunges need a permit in Utah?

A plunge used by the public is regulated like a public pool and reviewed by the local health department before it opens.

Can you pair a plunge with a hot tub or sauna?

Yes. We build hot and cold vessels side by side and install saunas, so the whole circuit is one project.

Related

Start a stainless project

Send plans if you have them. If not, tell us where it's going: on grade, in a deck or on a roof.

(801) 901-0580 scott@pasadenapools.com Salt Lake City, Utah

This opens your email app with the details filled in.